Jobs at FLASH Technology Group

View all jobs

Maintenance Engineer / Connectivity Engineer III

Annapolis Junction, Maryland · Information Technology
Connectivity Engineer - Line 2 Function 2 Level 3

Can also apply at www.flashtg.com or send resume to dmagruder@flashtg.com.

Comprehensive Benefits!
Generous Referral Bonuses!
 
Performs network design implementation, maintenance, and sustainment of existing networks; Implements and sustains Wide Area Networks (WANs), Campus Area Networks (CANs), Data Center Networks/Interfaces (DCN/DCI), Network Security (NETSEC) and Tactical/Deployable Networking Systems.
Analyzes design, specifications, and related documents.
Implements communication system requirements to support the distributed functionality of a networked enterprise environment.
Analyzes network characteristics (e.g. traffic connect time, transmission speeds, packet sizes and throughput), troubleshoots problems and recommends modification of network configurations.

Implements specific network solutions to support server requirements to include load-balancing, VPN’s, firewall contexts, and network address translation (NAT) where appropriate.
Minimizes network latency and maximize data throughput.
Validates new and existing dataflow and data formats.
Resolves complex network problems and operate network analyzers, WAN test equipment, and network simulators.
(U) Performs site surveys, system installations, configuration management, maintenance, modernization, and sustainment of a global Enterprise Network.
(U) Performs Connectivity Engineering Services to pre and post deployment tests.
(U) Employs Government standards to configure the interconnects between data centers, networks, and security boundaries.
Drafts technical requirements, configuration management, and planning documentation.
Performs QC, QA, and CM services.
Designs, integrates, configures, deploys, tesst, and maintains numerous types of network devices, interfaces and technologies to include VPN, VRF, VSS, BGP and OSPF routing, and VLAN.
Optimizes end-to-end system performance (capacity, margins, data quality etc.) and dataflow management.
Configures and optimizes the network to connect various front-end and back-end components
Coordinate with the system engineering and dataflow efforts to ensure proper mission operations to minimize down time.
Facilitate the implementation of high-speed, scalable, fault-tolerant network topologies as applicable to WAN and LAN design.
Lead large efforts of dynamic requirements and scale.
Work with System engineers, customers, and cross organizational teams to refine requirements.
Coordinate with appropriate dataflow organizations and end-customer recipients to mitigate potential adverse impacts on system-wide dataflow.
Implement specific network solutions to support server requirements to include load-balancing, VPN’s, firewall contexts, and network address translation (NAT) where appropriate.
Minimize network latency and maximize data throughput.
Validate new and existing dataflow and data formats.
Resolve complex network problems and operate network analyzers, WAN test equipment, and network simulators.
Perform site surveys, system installations, configuration management, maintenance, modernization, and sustainment of a global Enterprise Network.
Perform Connectivity Engineering Services to pre and post deployment tests.
 Employ Government standards to configure the interconnects between data centers, networks, and security boundaries.
Draft technical requirements, configuration management, and planning documentation.
Perform QC, QA, and CM services.
Design, integrate, configure, deploy, test, and maintain numerous types of network devices, interfaces and technologies to include VPN, VRF, VSS, BGP and OSPF routing, and VLAN.
Optimize end-to-end system performance (capacity, margins, data quality etc.) and dataflow management.
Configure and optimize the network to connect various front-end and back-end components
Coordinate with the system engineering and dataflow efforts to ensure proper mission operations to minimize down time.
Facilitate the implementation of high-speed, scalable, fault-tolerant network topologies as applicable to WAN and LAN design.
 Lead large efforts of dynamic requirements and scale.
Work with System engineers, customers, and cross organizational teams to refine requirements.
Coordinate with appropriate dataflow organizations and end-customer recipients to mitigate potential adverse impacts on system-wide dataflow.
 
Qualifications
 
Seven (7) years’ experience in programs and contracts of similar scope, type, and complexity is required.
Bachelor’s degree in engineering from an accredited college or university is required. Four (4) years of additional network engineering experience may be substituted for a bachelor’s degree.
An IAT level III baseline certification as defined by DoD 8570.01-M is required. An IAT II will be accepted (Security + CE, GSEC, or SSCP) if the candidate obtains an IAT level III (CISA, CISSP, CASP, GCIH, or GCED) within 1 month of contract award and provide expected date for completion.
A CCNP certification or higher; a CCNA and 2 additional year’s network experience may be substituted and candidates must show proof of actively working to obtain CCNP
 
Seven (7) years’ experience in Networking (WAN/CAN/DCN/NETSEC).
Three (3) years’ experience in operations and maintenance of NSANet or another IC Community secure WAN.
Three (3) years’ experience in operations and maintenance of routed LAN/CAN, routed WAN and switched LAN networks.
One (1) year experience operating and maintaining service provider MPLS WANs.
One (1) year experience troubleshooting NSANet issues.
One (1) year experience operating and maintaining Agency external (1P, 2P etc.) boundaries (peering points).

Service Industry
Communications Systems: Industry Best Practices, NSA-System Network Attack Center (SNAC) guide, DOD-Security Technical Implementation Guide (STIG).

SIGINT
Dataflow Analysis: • SIGINT Front End Processor Interfaces to Product Repositories. Understanding of one or more SIGINT collection system and the Dataflows (types of transfer protocols being utilized, backend repositories, analyst access points, etc). • Administrative Network Services (i.e. Telephony, Office automation, etc) understanding the Dataflow and packet interaction with client and servers.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
   
   
   
   
   
   
 
   
   
   
 
   
   
 

 


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
More Openings
Service Center Support I
Service Center Support I
Cabling Technicians
Harware Technicians
Network Technician
Share This Job
Powered by